PushPlus is a unique accessory for Dorsis Belport pocket doors that enables damping on both sides without having to forego the push-to-slide function. Suitable for doors that are wider than 860 mm (~33 ⅞").
You'll need the following tools:
Identify all of the parts:
Identify all of the components:
Identify all of the fasteners:
Remove the track from the Belport pocket door assembly.
Note: Store screws and reuse them later!
Remove the stopper and rollers:
Attach the roller and engage the two pins:
Remove the standard stopper. Install the trigger "c" and the soft-close rear stopper "d".
Slide the damper into the track. Tighten "y" bolt (this prevents the soft close damper from sliding during track installation in Step 7).
Re-insert the rear door stopper component.
Re-install the track.
Note: Reinstall all of the screws removed in Step 1! Move components in the guide rail if they cover the threads!
Remove the "y" bolt.
Adjust the back stop position.
